Tips to Test a Button Battery976138
Button battery is recognized as a little battery which is commonly utilized to energy the small electronic devices. This button battery gets its name because it is round and resembles buttons or coins. Many individuals are actually not truly familiar with this quite new type of battery. When you are getting electronic device which stops working, it may be brought on by a simple matter of the dead or dying button battery. At this time, this post is going to give you some tips of a testing technique for the button battery that will assist you to verify its situation.
As the first step, you should eliminate the battery from your device and then you require to inspect it for determining the battery voltage. The voltage is usually marked on the battery. It is recognized that most of the button batteries are produced in between 1.35 and three volts.
As the second step, you require to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to figure out the good side of your battery by finding side with a "+" that marked on it. After that, you require to touch the positive probe of multimeter (red) anyplace on this side.
The fourth step is to touch negative probe of multimeter (black) to the unfavorable side of your battery. The negative side is of course in the opposite side of the positive side.
The final step is to take a note of the voltage that is displayed on the multimeter. If you discover that the voltage is about ten % less than the marked voltage on battery, you need to replace it. For instance, the 1.5 battery must show the voltage of at least 1.35 volts, while the 3 volts battery should show the voltage of at least two.7 volts.
