Tips to Test a Button Battery780188
Button battery is known as a little battery which is generally used to power the little electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Many people are actually not really familiar with this quite new type of battery. When you are getting electronic device which stops working, it might be brought on by a simple matter of the dead or dying button battery. At this time, this article is going to give you some suggestions of a testing technique for the button battery that will assist you to verify its situation.
As the initial step, you should remove the battery from your device and then you need to inspect it for figuring out the battery voltage. The voltage is generally marked on the battery. It is known that most of the button batteries are produced between 1.35 and 3 volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to figure out the good side of your battery by discovering side with a "+" that marked on it. Following that, you need to touch the positive probe of multimeter (red) anyplace on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the negative side of your battery. The negative side is of course in the opposite side of the good side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about 10 percent much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery should show the voltage of at least 1.35 volts, whilst the three volts battery must show the voltage of at least 2.7 volts.
