Tips to Test a Button Battery9184141
Button battery is known as a little battery which is generally utilized to energy the little electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Many people are actually not truly familiar with this fairly new type of battery. When you are having electronic device which stops working, it might be caused by a easy matter of the dead or dying button battery. At this time, this article is going to give you some tips of a testing method for the button battery that will help you to check its situation.
As the first step, you should eliminate the battery from your device and then you require to inspect it for determining the battery voltage. The voltage is generally marked on the battery. It is known that most of the button batteries are made in between 1.35 and three volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to figure out the positive side of your battery by discovering side with a "+" that marked on it. Following that, you require to touch the positive probe of multimeter (red) anyplace on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the unfavorable side of your battery. The unfavorable side is of course in the opposite side of the good side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you discover that the voltage is about 10 % much less than the marked voltage on battery, you need to replace it. For instance, the 1.5 battery should show the voltage of at least 1.35 volts, whilst the 3 volts battery must show the voltage of at least two.7 volts.
