Voir la source de Suggestions to Test a Button Battery7792575

Button battery is known as a small battery which is commonly utilized to energy the little electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Many individuals are actually not truly familiar with this quite new type of battery. When you are getting electronic device which stops working, it may be caused by a easy matter of the dead or dying button battery. At this time, this post is going to give you some suggestions of a testing method for the button battery that will help you to verify its condition.

As the first step, you should eliminate the battery from your device and then you require to inspect it for figuring out the battery voltage. The voltage is usually marked on the battery. It is recognized that most of the button batteries are made in between 1.35 and three volts.

As the second step, you require to set the multimeter for displaying the voltage on the DCV scale.

The third step that you ought to do is to figure out the good side of your battery by finding side with a "+" that marked on it. After that, you require to touch the positive probe of multimeter (red) anyplace on this side.

The fourth step is to touch unfavorable probe of multimeter (black) to the negative side of your battery. The negative side is of course in the opposite side of the positive side.

The final step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about 10 % much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery should show the voltage of at least 1.35 volts, whilst the three volts battery should show the voltage of at least 2.7 volts.

[http://armor-team.com/activities/p/418886/ L1154 / AG13 button cell]