Tips to Test a Button Battery5215370
Button battery is recognized as a small battery which is generally used to energy the small electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Many people are really not truly familiar with this quite new type of battery. When you are getting electronic device which stops operating, it might be brought on by a simple matter of the dead or dying button battery. At this time, this article is going to give you some tips of a testing technique for the button battery that will assist you to check its condition.
As the initial step, you should eliminate the battery from your device and then you require to inspect it for determining the battery voltage. The voltage is usually marked on the battery. It is known that most of the button batteries are made in between 1.35 and three volts.
As the second step, you require to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to determine the positive side of your battery by discovering side with a "+" that marked on it. After that, you require to touch the good probe of multimeter (red) anyplace on this side.
The fourth step is to touch negative probe of multimeter (black) to the negative side of your battery. The unfavorable side is of course in the opposite side of the good side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about 10 % much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery must show the voltage of at least 1.35 volts, whilst the 3 volts battery must show the voltage of at least two.7 volts.
