Tips to Test a Button Battery8342027
Button battery is recognized as a little battery which is generally used to power the little electronic devices. This button battery gets its name because it is round and resembles buttons or coins. Numerous people are really not really familiar with this fairly new type of battery. When you are having electronic device which stops operating, it might be caused by a simple matter of the dead or dying button battery. At this time, this article is going to give you some tips of a testing method for the button battery that will assist you to verify its condition.
As the initial step, you ought to eliminate the battery from your device and then you require to inspect it for figuring out the battery voltage. The voltage is usually marked on the battery. It is known that most of the button batteries are made between 1.35 and 3 volts.
As the second step, you need to set the multimeter for displaying the voltage on the DCV scale.
The third step that you ought to do is to figure out the good side of your battery by discovering side with a "+" that marked on it. After that, you need to touch the good probe of multimeter (red) anyplace on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the unfavorable side of your battery. The negative side is of course in the opposite side of the good side.
The final step is to take a note of the voltage that is displayed on the multimeter. If you find that the voltage is about ten percent much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery must show the voltage of at least 1.35 volts, whilst the three volts battery must show the voltage of at least two.7 volts.
